Reliable Performance
Engineered for dependable feeding performance throughout the casting process.
Exothermic feeding solution
Blind Type Exothermic Sleeves
These sleeves are available in various sizes ranging from 1” to 7” diameter and a maximum height of 8”. Sleeves are available in open and blind categories.
Key advantages
- Highly exothermic in nature, MEF (1.6)
- Also insulating and do not cause initial chill of metal in the sleeve
- High feeding efficiency
- Helps reduce rejection and improve casting yield
Blind Type Exothermic sleeves
These sleeves are available in various sizes ranging from 1” to 7” dia & maximum height of 8”. Sleeves are available in open & blind categories
Advantages
1. Highly exothermic in nature, MEF (1.6)
2. These sleeves are also insulating in nature do not cause initial chill of metal in the sleeves
3. High feeding efficiency.
4. Reduce rejections by way of reducing rejections & improving yield of casting.
Improved Yield
Helps reduce riser volume, metal consumption and overall casting costs.
Flexible Sizing
Available in standard configurations with custom sizes offered on request.
Product performance
Technical Specifications
Standard dimensions and performance parameters for this sleeve range.
| Ordering code |
Dimensions (mm) | Vol. of Liq. Metal in Sleeve (cc) |
Geometric Modulus (mm) |
Effective Modulus (mm) |
Pack size (Nos.) |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ødt | øDt | ødb | øDb | h | H | a | D1 | D2 | |||||
| 4x7B | 36 | 58 | 40 | 60 | 59 | 71 | 13 | 11 | 9 | 65 | 7.49 | 12 | 200 |
| 5x8B | 48 | 70 | 51 | 72 | 67 | 83 | 16 | 13 | 9 | 123 | 9.57 | 15.17 | 144 |
| 6x9B | 56 | 75 | 56 | 77 | 75 | 91 | 18 | 14 | 9 | 174 | 10.47 | 16.4 | 112 |
| 7x10B | 64 | 91 | 67 | 92 | 86 | 100 | 22 | 13 | 10 | 272 | 12.27 | 20.07 | 84 |
| 8x11B | 73 | 98 | 79 | 102 | 93 | 111 | 22 | 10 | 10 | 405 | 14.5 | 23.29 | 36 |
| 15x15B | 146 | 193 | 145 | 183 | 153 | 177 | 23 | 30 | 29 | 2499 | 27.8 | 44.43 | 9 |
- Bottom surface of the sleeve riser is taken as cooling surface.
- Full height of the sleeve is considered in calculating the volume of metal in the sleeve.
- Dimensions given above are nominal. Tolerance of 3 mm in diameter and height may occur.
Need dimensions or technical data?
Detailed data sheets and sizing support are available from our team.